Teledyne 4250, Installation And Operation Manual, Page: 53 / 204

4250 Flow Meter
Section 2 Programming
2-25
This step lets you determine the contents of the reports gen-
erated by the flow meter. The flow meter’s report generator is
capable of creating two different reports (A and B) that can be
identical or quite different. The reason for two reports is to allow
the summary of flow meter recording over different time periods.
For example, you might generate report A weekly, and report B
monthly. At this point we are only interested in selecting the
items the flow meter will include in each report. Press
Enter and
the following will appear:
FLOW METER HISTORY is just off the screen, to the right. If
you select FLOW and press
Enter , the following will appear:
Select YES if you want LEVEL to appear in the report, then
press
Enter . The following will appear:
Select YES if you want FLOW RATE to appear in the report,
then press
Enter again. Then:
Select YES if you want RAINFALL to appear in the report. Note
that you must have a rain gauge connected to the flow meter to
sense rainfall occurrence. Press
Enter . The following will
appear:
FLOW METER HISTORY is off the screen to the right. Select
DO/PH. Press
Enter . The following will appear:
Select YES if you want DO/PH to appear in the report. Note that
you must have the appropriate sensor connected to the flow
meter to sense parameters; the flow meter is capable of sensing
temperature, pH and temperature, and D.O. (dissolved oxygen)
and temperature. Press
Enter . The following will appear:
REPORT SETUP
• FLOW • • DO/PH • •YSI 600 • • SAMPLE HISTORY •
LEVEL IN REPORT
• YES • • NO •
FLOW RATE IN REPORT
• YES • • NO •
RAINFALL IN REPORT
• YES • • NO •
REPORT SETUP
• FLOW • • DO/PH • • YSI 600 • • SAMPLE HISTORY •
PH OR DO IN REPORT
• YES • • NO •
TEMPERATURE IN REPORT
• YES • • NO •