Operator’s Manual Simple TrueArb
Application
10
•
T3AWG3352/3252 Mixed signal generation: 2 analog 8 digital outputs (with T3AWG3-
8DIG option)
•
T3AWG3354/3254 Mixed signal generation: 4 analog 16 digital outputs (with T3AWG3-
16DIG-4CH option)
•
T3AWG3358/3258 Mixed signal generation: 8 analog 32 digital outputs (with T3AWG3-
32DIG-8CH option)
•
Simple touch screen user interface to create complex waveforms scenarios just in few screen
touches
•
Large 7 inch, 1024x600 capacitive touch LCD
•
Touchscreen or Keypad data entering
•
Windows 10 operating system
•
USB and LAN interfaces
•
Compact case size with the possibility of rack mounting in 3U
Installing you instrument
Unpack the instrument and check that you received all items listed in the Package Content paragraph.
NOTE.
The instrument does not ship with a product software CD. To reinstall the product software,
follow the instructions in the paragraph “
Obtaining the Latest Software Releases
” to get the latest
software release and the instructions in the paragraph “
Install Simple TrueArb Application
” to install the
application
Operating Requirements
CAUTION.
To ensure proper cooling, keep sides of the instrument clear of obstructions.
Place the instrument on a cart or bench, observing clearance requirements:
•
Top: 20 mm (0.8 in)
•
Left and right side: 150 mm (5.9 in)
•
Bottom: 20 mm (0.8 in)
•
Rear: 75 mm (3 in)
CAUTION.
Ensure that the equipment is positioned in a way that the disconnecting device can be readily
accessible.
The instrument is intended for indoor use and should be operated in a clean, dry, nonconductive
environment. Occasionally a temporary conductivity that is caused by condensation must be expected.
This location is a typical office/home environment. Temporary condensation occurs only when the
product is out of service.
