Operator’s Manual Simple TrueArb
Application
44
More Button Menu Items
Description
Exit Button
–
Press this button to close the
application.
Full/Float Button
–
press this button to
maximize or reduce the application screen;
in this way you can access to Windows OS.
Load From Button
–
Use this button to load a
configuration file. (For more information,
please refer to the relative section).
Save As
–
Use this button to Save the
Current configuration into an existing one or
create a new one. (For more information,
please refer to the relative section).
Export
–
Use this button to export the
current configuration. (For more
information, please refer to the relative
section).
Remote Control Button
–
Use this button to
open the SCPI server page. In that page you
can enable or disable the SCPI server and see
the sequence of commands sent to the
instrument and its response.
Change Format
–
Use this button to change
the waveform vertical parameters from
Voltage High(V) and Voltage Low(V) to
Amplitude(Vpp)/Offset(V)
Change Application
–
Use this button to
switch from AWG to AFG application.
About Button
–
Use this button to check the
credits, the software and firmware release
number and the instrument serial number.
Help Button
–
Use this button to open the
User Manual.
Calibration button
–
Use this button to enter
the Calibration and Diagnostic page. (For
more information, please refer to the
relative section).
