Operator’s Manual Simple TrueArb
Application
56
Sequencer item Length Strategy:
•
Adapt to the longer analog waveform
: if this option is selected the length of an entry of the
sequencer by default will be equal to the length of the longer channel waveform, among all
analog channels, assigned to the entry.
•
Adapt to the shorter analog waveform
: if this option is selected the length of an entry of the
sequencer by default will be equal to the length of the shorter channel waveform, among all
analog channels, assigned to the entry.
•
Apply the default value
: if this option is selected the length of an entry of the sequencer by
default will be equal to the value specified in the
Sequencer Item Default Length
[N] parameter
The length of each entry can be manually and individually overwritten by changing the Entry Length [N]
parameter in the Waveform Parameters section of the Waveform Area. Anyway if a change in any
channel waveform of the entry occur, the length of the entry will be recalculated using the strategy
specified in the
Sequencer item Length Strategy
parameter
.
Sequencer Item Default Length [N]
: this parameter specifies the length of the sequencer entries in the
case when the
Sequencer item Length Strategy
parameter is set to
Apply the default value.
Warnings Enabled
: this parameter enables or disables the warnings shown in the Sequencer Toolbar and
in the Waveform Area that notify that one or more channel waveforms have been assigned to an entry
with a different length. This situation will cause the application the modify the mismatching waveforms
during the execution to match the entry length using the strategy specified in the
Sample
increasing/decreasing strategy
parameter (Device Settings -> General page)
