Operator’s Manual Simple TrueArb
Application
31
It is sometimes necessary to create long waveform files to fully implement a DUT test. In case where
portions of a waveforms must be repeated, the waveform sequencer functionalities can save you a lot of
memory-intensive waveform programming.
The Sequencer allows you to define the set of waveforms that will be generated, their sequence, the
number of repetitions for each waveform and the generation conditions.
The sequencer is mainly used for the following two purposes:
▪
Output waveform longer than hardware memory
▪
Change the output waveform quickly on a specific trigger conditions
A sequence is made of multiple entries; each entry contains analog and digital waveforms properly
formatted.
IMPORTANT NOTE
The T3AWG-3K Series has a unique sequencer for all channels. Therefor the length and repetitions of
each sequencer entry are common to all output channels. In the same way all analog and digital outputs
share the same sampling clock. In this way they are synchronized each other.
∞
Entry 2
4
Entry 1
(square)
Entry 3
(sine)
