Field
Description
XAUTH Profile
Select a profile created in VPN->IPSec->XAUTH Profiles if you
wish to use this IPSec peer XAuth for authentication.
If XAuth is used together with IKE Config Mode, the transac-
tions for XAuth are carried out before the transactions for IKE
Config Mode.
Number of Admitted
Connections
Choose how many users can connect using this peer profile.
Possible values:
•
: 0#
(default value): Only one peer can be connected
with the data defined in this profile.
•
%3,), 0##
: Several peers can be connected with the
data defined in this profile. The peer entry is duplicated for
each connection request with the data defined in this profile.
Start Mode
Select how the peer is to be switched to the active state.
Possible values:
•
: .
(default value): The peer is switched to the active
state by a trigger.
•
-,1&# 3)
: The peer is always active.
Fields in the menu Advanced IP Options
Field
Description
Public Source IP Ad-
dress
If you are operating more than one Internet connection in paral-
lel, you can specify here the public IP address which is to be
used as the source address for the peer's data traffic. Select
whether the Public Source IP Address is to be enabled.
The function is enabled with
,
.
In the input field, enter the public IP address which is to be used
as the sender address.
The function is disabled by default.
Back Route Verify
Select whether a check on the back route should be activated
for the interface to the connection partner.
The function is enabled with
,
.
Teldat GmbH
18 VPN
bintec Rxxx2/RTxxx2
335
