Field
Description
Select the type.
Possible values:
-&
,
" ),&
,
.# 3"
,
,
* 3" F3"
,
@"
,
"
,
( <"
,
(#)
,
(#) ),&
.
See RFC 792.
The default value is
-&
.
Connection State
With Protocol =
(2
, you can define a filter that takes the
status of the TCP connections into account.
Possible values:
•
#,#
: All TCP packets that would not open any new
TCP connection on routing over the gateway match the filter.
•
-&
(default value): All TCP packets match the filter.
Destination IP Ad-
dress/Netmask
Enter the destination IP address of the data packets and the
corresponding netmask.
Destination Port/Range Only for Protocol =
(2
or
0.
Enter a destination port number or a range of destination port
numbers.
Possible values:
•
-,,
(default value): The destination port is not specified.
•
*)"!& )
: Enter a destination port.
•
*)"!& )
: Enter a destination port range.
Source IP Address/
Netmask
Enter the source IP address of the data packets and the corres-
ponding netmask.
Source Port/Range
Only for Protocol =
(2
or
0.
Enter a source port number or a range of source port numbers.
Possible values:
•
-,,
(default value): The destination port is not specified.
•
*)"!& )
: Enter a destination port.
•
*)"!& )
: Enter a destination port range.
Teldat GmbH
14 Networking
bintec Rxxx2/RTxxx2
215
