Teldat bintec R1202, Manual

Page: 434 / 622

Field Description
PRI interface.
•
A!" <B
: Restricts the entry to the selected
BRI interface.
•
A* -"" 3B
: Restricts the entry to the selected SIP ac-
count.
•
-&
: No restriction of the entry.
Called Line
Here you have the option of entering the destination line of the
call.
Possible values:
•
)A!" <B
: Restricts the entry to the selected
PRI interface.
•
A!" <B
: Restricts the entry to the selected
BRI interface.
•
A* -"" 3B
: Restricts the entry to the selected SIP ac-
count.
•
-&
: No restriction of the entry.
Enter either Called Line or Called Address.
If a value other than
-&
is selected, Called Address should
not be used. If Called Line =
-&
and Called Address is not
used, all calls for Called Line are processed.
Called Address Here you have the option of entering the destination address of
the call.
Enter either Called Line or Called Address. If Called Address
is used, then Called Line =
-&
can be set .
Calling Address Trans-
lation Enter the transformation rule applied to the call numbers.
Notation: <a:b>; i.e. a is replaced by b. Every rule must be
ended with a semicolon. A number of rules can be chained to-
gether using semicolons as separators, e.g. <a:b>;<c:d>;<e:f>;.
After confirmation of entry, the rule chain is automatically sorted
by the "best match" method.
? is a placeholder for an arbitrary digit.
20 VoIP Teldat GmbH
420 bintec Rxxx2/RTxxx2