Field
Description
IP Compression
Select whether compression is to be activated before data en-
cryption. If data is compressed effectively, this can result in
higher performance and a lower volume of data to be trans-
ferred. In the case of fast lines or data that cannot be com-
pressed, you are advised against using this option as the per-
formance can be significantly affected by the increased effort
during compression.
The function is enabled with
,
.
The function is disabled by default.
Alive Check
Select whether and how IPSec heartbeats are used.
A Teldat IPSec heartbeat is implemented to determine whether
or not a Security Association (SA) is still valid. This function
sends and receives signals every 5 seconds, depending on the
configuration. If these signals are not received after 20 seconds,
the SA is discarded as invalid.
Possible values:
•
-3 "
(default value): Automatic detection of whether
the remote terminal is a Teldat device. If it is,
?#
* K<)"
(for a remote terminal with Teldat) or
"
(for a remote terminal without Teldat) is set.
•
"
: Your device sends and expects no heartbeat. Set
this option if you use devices from other manufacturers.
•
?# <)" ,&
: Your device expects a
heartbeat from the peer but does not send one itself.
•
*
: Your device expects no heartbeat from the peer, but
sends one itself.
•
?# * K<)"
: Your device expects a
heartbeat from the peer and sends one itself.
Propagate PMTU
Select whether the PMTU (Path Maximum Transfer Unit) is to
be propagated during phase 2.
The function is enabled with
,
.
The function is enabled by default.
Teldat GmbH
18 VPN
bintec Rxxx2/RTxxx2
353
