Teldat bintec R1202, Manual

Page: 218 / 622

Field Description
Enter the destination port or the destination port range of the
original data packets. The default setting
-,,
means that the
port is not specified.
In the NAT Configuration ->Replacement Values menu you can define, depending on
whether you're dealing with inbound or outbound data traffic, new addresses and ports, to
which specific addresses and ports from the NAT Configuration ->Specify original traffic
menu can be translated.
Fields in the Replacement Values menu.
Field Description
New Destination IP Ad-
dress/Netmask Only for Type of traffic =
" .# '-(
Enter the destination IP address to which the original source IP
address is to be translated, with corresponding netmask, as the
case arises.
New Destination Port Only for Type of traffic =
" .# '-(
,
Service =
3#!
and Protocol =
(2
,
0.
,
(250.
Leave the destination port as it appears or enter the destination
port to which the original destination port is to be translated.
Selecting
: ,
leaves the original destination port. If you
disable
: ,
, an input field appears in which you can
enter a new destination port.
: ,
is active by default.
New Source IP Ad-
dress/Netmask Only for Type of traffic =
3 * 3" '-(
and NAT
method =
#&"
Enter the source IP address to which the original source IP ad-
dress is to be translated, with corresponding netmask, as the
case arises.
New Source Port Only for Type of traffic =
" .# '-(
,
NAT method =
#&",
, Service =
3#!
and
Protocol =
(2
,
0.
,
(250.
Leave the source port as it appears or enter a new source port
to which the original source port is to be translated.
14 Networking Teldat GmbH
204 bintec Rxxx2/RTxxx2