Tektronix TMS 600 SAB-C167 80C167, Instruction Manual

Page: 19 / 94

Getting Started
TMS 600 SAB-C167 80C167 Microcontroller Support Instruction Manual
1–3
Dynamic Bus Width Switching. The disassembler does not acquire data when the
microcontroller is operating in dynamic bus width switching mode.
Code In Internal ROM. The disassembler does not acquire code in internal ROM
when executed.
PEC Detection.
The disassembler does not support PEC (peripheral event
controller) detection by the disassembler, only the marking options are provided.
Opcode Fetch and Data Read.
There is no signal on the microcontroller to
distinguish between Opcode Fetches and Data Reads. Use marking options to
correct the disassembler.
Configuring the Probe Adapter
There is one jumper on the probe adapter to select between multiplexed and
demultiplexed address mode.
Figure 1–1 shows the MUX/DEMUX jumper location on the probe adapter.
MUX/DEMUX
Jumper
Figure 1–1: Jumper locations on the probe adapter