Getting Started
TMS 600 SAB-C167 80C167 Microcontroller Support Instruction Manual
1–7
5. Align pin 1 on the LO cable connector, the end on the narrowest cable strip
of the cable, with pin 1 on the LO connector on the high-density probe.
Connect the cable to the connector as shown in Figure 1–4.
High-density probe
Pin-1 side
Figure 1–4: Connecting the cable to the high-density probe
CAUTION.
Failure to correctly place the probe adapter onto the microcontroller
might permanently damage all electrical components when power is applied.
Center the clip on the microcontroller and apply an equal downward force on all
four sides of the clip, slightly rocking the probe adapter in a clockwise circle.
Do not apply leverage to the probe adapter when installing or removing it.
Summary of Contents for TMS 600 SAB-C167 80C167
