![background image](http://html1.mh-extra.com/html/tektronix/tms-600-sab-c167-80c167/tms-600-sab-c167-80c167_instruction-manual_1078308090.webp)
Index
Index–2
TMS 600 SAB-C167 80C167 Microcontroller Support Instruction Manual
setup, 2–1
disassembly format definition overlay, 2–7
disassembly property page, 2–7
display formats
control flow, 2–6
hardware, 2–4
software, 2–5
special characters, 2–3
subroutine, 2–6
E
EIAJ QFP test clip, microcontroller signal names, 3–15
electrical specifications, 3–2
environmental specifications, 3–4
exception labels, 2–9
F
fuse, replacing, 4–2
H
hardware display format, 2–4
cycle type definitions, 2–4
high density probe, connecting channels to, 1–8
I
installing hardware. See connections
L
leads (podlets), high density probe. See connections
logic analyzer
configuration for disassembler, 1–2
definition, x
software compatibility, 1–2
M
manual
conventions, ix
how to use the set, ix
mark cycle function, 2–7
mark opcode function, 2–7
marking cycles, definition of, 2–7
microcontroller, specific clocking and how data is
acquired, 3–12
microcontroller signal names, pin number on 144 pin
EIAJ QFP test clip, 3–15
microprocessor, package types supported, 1–1
Misc0 group, channel assignments, 3–9
Misc1 group, channel assignments, 3–10
mnemonic display column, 2–5
module definition, x
multiplexed and demultiplexed jumper, 1–3
multiplexed bus timing, 3–13
N
number of address lines, 2–7
P
P54C definition, ix
pin out, 144 pin EIAJ QFP test clip, 3–15
Port2 group, channel assignments, 3–8
Port7 group, channel assignments, 3–10
Port8 group, channel assignments, 3–11
power, for the probe adapter
applying, 1–11
removing, 1–12
power jack, 1–12
probe adapter
144 pin EIAJ QFP test clip, microcontroller signal
names, 3–15
alternate connections, 3–15
circuit description, 4–1
clearance, 1–4
dimensions, 3–5
configuring, 1–3, 3–2
hardware description, 3–1
jumper positions, 1–3, 3–2
not using one, 1–8
replacing the fuse, 4–2
R
Reset, SUT hardware, 1–2
restrictions, 1–2
code in internal ROM, 1–3
dymanic bus width switching, 1–3
Opcode fetch and data read, 1–3
PEC detection, 1–3
without a probe adapter, 1–8
Summary of Contents for TMS 600 SAB-C167 80C167
