1
Governors America Corp. © 2020 Copyright All Rights Reserved
ACE295 Series Actuator
3-2020-C
PIB4160
ACE295 Series
Integrated Pump Mounted Electric Actuator
The GAC ACE295 Series Electric Actuator is designed
to mount directly on Bosch ‘P’ 9000 and 10000 series
fuel injection pumps in place of the mechanical governor.
The 295 Series actuators provide a high performance
integrated control system with no external linkages or
brackets.
The actuator is designed with two isolated chambers
that eliminates the possibility of any magnetic particles
collecting and jamming the actuator. One chamber
contains the oil and houses the actuator linkage while
the second chamber houses the electromagnetic
components.
The 295 Series typically outlasts the life of a diesel
engine. Camshaft bearing retainer kits and position
feedback sensor equipped versions are also available.
1
2
INTRODUCTION
SPECIFICATIONS
PERFORMANCE
Force
13.2 lbf (58.7 N)
Operating Stroke
0.79 in +/- 0.04 in (20 mm +/- 1 mm)
POWER INPUT
Operating Voltage
24 V DC
Normal Operating Current
2.4 A
Maximum Current Continuously Rated
4.5 A
ENVIRONMENT
Operating Temperature Range
-40 °F to +185 °F (-40 °C to +85 °C)
Relative Humidity
up to 100 %
All Surface Finishes
Fungus Proof and Corrosion Resistant
PHYSICAL
Dimensions
See Section 3, INSTAllATION DIAGRAM
Weight
11 lbf (4.9 kgf)
Mounting
Directly on ‘P’ 9000 and ‘P’ 10000 Bosch fuel injection pumps in place of the
mechanical governor. Gasket supplied with kit.
MATING HARDWARE
Wiring Harness - ACE295
CH1215
Wiring Harness - ACE295F-24
CH1515
