Tektronix TMS 600 SAB-C167 80C167, Instruction Manual, Page: 13 / 94

TMS 600 SAB-C167 80C167 Microcontroller Support Instruction Manual
ix
Preface: Microcontroller Support Documentation
This instruction manual contains specific information about the TMS 600
80C167 microcontroller support and is part of a set of information on how to
operate this product on compatible Tektronix logic analyzers.
If you are familiar with operating microcontroller supports on the logic analyzer
for which the TMS 600 80C167 support was purchased, you will probably only
need this instruction manual to set up and run the support.
If you are not familiar with operating microcontroller supports, you will need to
supplement this instruction manual with information on basic operations to set up
and run the support.
Information on basic operations of microcontroller supports is included with each
product. Each logic analyzer has basic information that describes how to perform
tasks common to supports on that platform. This information can be in the form
of online help, an installation manual, or a user manual.
This manual provides detailed information on the following topics:
H
Connecting the logic analyzer to the system under test
H
Setting up the logic analyzer to acquire data from the system under test
H
Acquiring and viewing disassembled data
H
Using the probe adapter
Manual Conventions
This manual uses the following conventions:
H
The term “disassembler” refers to the software that disassembles bus cycles
into instruction mnemonics and cycle types.
H
The phrase “information on basic operations” refers to online help, an
installation manual, or a basic operations of microcontroller supports user
manual.
H
In the information on basic operations, the term “XXX” or “P54C” used in
field selections and file names must be replaced with C167. This is the name
of the microcontroller in field selections and file names you must use to
operate the 80C167 support.
H
The term “system under test” and “SUT” refers to the microcontroller-based
system from which data will be acquired.