Infineon XDPL8220 Getting Started Download

Page: 1 / 14

Application Note

Please read the Important Notice and Warnings at the end of this document

Revision 1.0

www.infineon.com

2016-11-01

AN_GS_201611_PL21_003

Getting Started with the XDPL8220 Reference
Board Using .dp Vision Software

XDP

digital power

About this document

Scope and purpose

The purpose of this document is to give a quick guide how to operate the XDPL8220 reference board of all

power classes for LED lighting applications and use the .dp Vision software to programm the operating

parameters of the digital controller XDPL8220.

Intended audience

This document is intended for anyone who wants to evaluate the XDPL8220 reference design for LED lighting.

Table of Contents

About this document....................................................................................................................... 1
Table of Contents ........................................................................................................................... 1
1

Hardware...................................................................................................................... 2

1.1

Required Hardware tools........................................................................................................................2

1.2

Hardware Connection .............................................................................................................................3

Software....................................................................................................................... 6

2.1

Required Software Tools.........................................................................................................................6

2.2

Software Installation...............................................................................................................................7

Getting Started.............................................................................................................. 8

Revision History ............................................................................................................................13

Summary of Contents for XDPL8220















Search results

Summary of Contents for XDPL8220

Reviews:

Related manuals for XDPL8220

Brands by name

Popular brands

Infineon XDPL8220, Getting Started

Search results

Summary of Contents for XDPL8220

Reviews:

Related manuals for XDPL8220

Brands by name

Popular brands