Tektronix TLA7AA1, Manual, Page: 97 / 173

Performance Verification
4- 30
TLA7AXX Logic Analyzer Module Service Manual
12. After the procedure finishes, click the Next button to open the Finish dialog
box where you can save the results to a file. Enter a file name and click the
Save button. You can use the Save dialog to save the file to a folder of your
choice or use the default location.
13. Click the Finish button to complete the process.
Logic Analyzer Module Certification
This section describes the procedures to certify the logic analyzer. You can
certify the logic analyzer without completing the main performance verification
procedures. Table 4--5 lists the certifiable parameters for the logic analyzer.
Table 4- 5: Logic analyzer certification test
Performance verification test name Specification tested
1. Thresholds
1
Threshold accuracy
1
Certifiable parameter
To certify the logic analyzer module, use the performance verification software
and click the Certification button. Perform the required procedure and then print
the results to obtain a copy of the software-generated calibration data report.
NOTE
. The certification procedures have the same prerequisites as the perfor-
mance verification procedures. Refer to Prerequisites on page 4--10 for a
detailed list of prerequisites.
These procedures require the same setups as described for the Performance
Verification procedures. It is assumed that the logic analyzer is already connected
to the TLACAL2 test fixture and that the performance verification software is
installed on the hard disk of the logic analyzer. It is also assumed that the logic
analyzer module is installed in the logic analyzer mainframe. The following
procedures describe the specific connections from the logic analyzer module to
the probes and the TLACAL2 test fixture.
Equipment Setups