Merging Modules
6.
Push forward on the cover so that you insert the tab on the front edge of the
cover into the rear of the front subpanel. Make sure that the cover is fully
seated and there are no gaps between the front and rear chassis
fl
anges. (See
Figure 54 on page 66.)
7.
While holding the cover in place, install the screws nearest the front of the
module to secure the cover to the chassis.
8.
Install the screws near the front of the module.
9.
Slide the rear panel on the chassis and install the rear panel screws.
10.
Install the top and bottom rear screws.
11.
Install the merge cable bracket so that the guide pins point into the module.
12.
Install and tighten the screws on the merge cable bracket.
13.
Verify that you have installed and tightened all screws on the module.
TLA7000 Series Logic Analyzers Installation Manual
69
Summary of Contents for TLA7000 Series
Page 1: ...TLA7000 Series Logic Analyzers Installation Manual www tektronix com 071 1747 03 ...
Page 72: ...Basic Installation 54 TLA7000 Series Logic Analyzers Installation Manual ...
Page 88: ...Merging Modules 70 TLA7000 Series Logic Analyzers Installation Manual ...
Page 104: ...Restoring and Reinstalling Software 86 TLA7000 Series Logic Analyzers Installation Manual ...