Tektronix TLA Series, Service Manual

Page: 29 / 130

TLA Series Digitizing Oscilloscope Modules Service Manual
2- 1
Operating Information
This chapter describes how to operate the DSO module when performing
maintenance. The operating information is limited to the functions you need to
perform the procedures found in this manual. You can find more detailed
operating instructions in the
Tektronix Logic Analyzer Family User Manual and
in the online help.
The following sections are included in this chapter:
H
The Installation section describes how to install the DSO module in the
mainframe.
H
The Software Installation and Removal section describe how to install and
remove the performance verification and adjustment software. You need this
software to complete the performance verification procedures and adjustment
procedures as described in the
Performance Verification
and
Adjustment
Procedures chapters of this manual.
H
Operating Information describes front-panel connectors and indicators, the
power-on procedure, self cal, self tests, and instrument commands used for
maintenance.
Installation
Basic installation instructions are contained in the Tektronix Logic Analyzer
Family User Manual
; refer to that manual for detailed information not covered in
this manual. This section describes how the following tasks:
H
Set the logical address
H
Install the DSO module in a mainframe
H
Remove the DSO module from a mainframe
Every module installed within a mainframe must have a unique logical address;
no two modules can have the same address. Two rotary switches on the rear
panel of the DSO module select the logical address. Refer to Figure 2--1 for the
switch location.
The factory default recommended switch setting (FF) allows the controller to
assign a logical address to the digitizing oscilloscope module. This is called
Dynamic Auto Configuration. You can also select static addresses between 01
and FE hexadecimal (1 to 254 decimal). Read the following descriptions before
setting the logical address.
Setting the Logical
Address