Tektronix TLA Series, Service Manual

Page: 27 / 130

Specifications
TLA Series Digitizing Oscilloscope Modules Service Manual
1- 7
Table 1- 4: Trigger system (Cont.)
Characteristic Description
Time, Minimum Pulse or Rearm, and Minimum
T
iti Ti f P l T T i i
For vertical settings >100 mV and
≤
10 V at the BNC input
Transition Time, for Pulse-Type Triggering,
typical
Pulse Class Minimum Pulse Width Minimum Rearm Width
typical
Glitch 1 ns 2 ns + 5% of Glitch Width
Setting
Width 1 ns 2 ns + 5% of Width Upper
Limit Setting
Trigger Position Error, Edge Triggering, typical Acquisition Mode Trigger Position Error
8
Sample
±
(1 Sample In 1 ns)
Table 1- 5: Front-Panel Connectors
Characteristic Description
n
Probe Compensator, Output Voltage
The Probe Compensator output voltage in
peak-to-peak Volts 0.5 V (base--top)
±
1% into a
≥
50
Ω
load
Table 1- 6: Environmental
Characteristic Description
Altitude, Operating and Nonoperating Operating: to 15,000 feet (4570 m) provided maximum ambient temperature is
derated by 1
_
C/1000 ft. above 1000 ft.
Nonoperating: to 40,000 feet (12,190 m)
Humidity, Operating and Nonoperating To 95% relative humidity at or below +30
_
C; to 45% relative humidity up to +50
_
C
Temperature, Operating and Nonoperating Operating: 0
_
C to +50
_
C ambient air, when operated in a mainframe that provides
at least 14 CFM of air flow resulting in no more than 12
_
C temperature rise of the
air passing through this instrument.
Nonoperating: --40
_
C to +71
_
C
8
The trigger position errors are typically less than the values given here. These values are for triggering signals having a
slew rate at the trigger point of
≥
5% of full scale/ns.