Tektronix RSA7100 Series, Quick Start User Manual

Page: 97 / 104

Operation
To perform a Greater Than or a Less Than mask test.
1. Specify what to test for by making a
selection from the
Test for drop-down
list.
To test for signal levels above or below
a speci
fi ed level, select either is greater
than or is less than .
2. Press the Run button to initiate a test.
Click the
Replay button on the toolbar to
initiate a test on the current data record.
3. Notice the vertical red bar. It highlights
results that match the test de
fi nition.
4. Click the close box to remove the Mask
Test control panel.
RSA7100 Series Quick Start User Manual 77