Operation
Repeat RSA Map measurements
Repeat measurements lets you automatically map a single measurement at a set time interval or change in GPS position. To
perform repeat measurements, GPS must be enabled and locked. The map used must be a geo-referenced map.
NOTE.
The RSA Map program maps only completed measurement results. If the speci
fi
ed time interval is less than that
required to take a measurement, RSA Map ignores the speci
fi
ed time interval and maps results as soon as the measurement
acquisition is done. For example, if the instrument requires 20 seconds to take a measurement, but the time interval is set to
10 seconds, then the instrument maps results every 20 seconds.
1.
Set up the measurement parameters
(frequency, bandwidth, and so on) in the
SignalVu-PC application.
2.
Select
Tools
>
RSA Map
to return to the
RSA Map application.
3.
Enable GPS as previously described.
4.
Tap the Repeat Measurements button.
5.
Tap the Settings button display the
Settings window.
6.
Set the type of measurement interval
(time or distance between measurement
positions) as needed.
7.
Tap
Done
.
54
RSA7100 Series Quick Start User Manual
