Before installation
Clearance requirements for the CTRL7100.
Observe these clearance requirements for the controller when placing it
on a cart, bench, or rack.
Top/bottom: 6.4 mm (0.25 in)
Sides: 6.4 mm (0.25 in)
Front/rear: 76.2 mm (3.0 in)
Rackmounting the RSA7100 and CTRL7100
This system ships with a rackmount kit for each instrument. Instructions for installing the rackmounts are supplied in the kits.
Neither of these rackmounts is meant for use in vehicles. They are intended only for racks in a stationary environment, such
as a laboratory or factory. If a vehicle rackmount is desired, a tray plus perimeter clamp should be used instead of the rails.
RSA7100 Series Quick Start User Manual
5
