Operation
3.
Click
Open
. The RSA Map application
will load the selected map
fi
le.
Set up a GPS receiver
To include GPS-derived coordinates with measurements when they are placed on a map, you must enable GPS in RSA Map.
NOTE.
An external GPS receiver with USB interface is recommended. The GPS receiver must output NMEA 0183 serial
data. Install any necessary software for the GPS receiver before running RSA Map.
1.
Connect a GPS receiver with USB
interface to one of the USB ports on the
instrument.
2.
Click on the
GPS
icon.
This displays the
Setup GPS
window.
3.
Click the
Enable
check box.
4.
Click the
COM port
drop-down list arrow
and scroll through the list. Select the port
that displays the name of the attached
GPS receiver.
5.
Set the Baud Rate as appropriate for the
connected GPS receiver.
6.
Click
Apply
to enable GPS.
50
RSA7100 Series Quick Start User Manual
