Operation
Use a Standards Preset.
When you select a speci
fi
c standard from the Standards presets, the analyzer automatically
loads the displays and settings that are optimal for analysis of signals based on that standard.
1.
Select
Presets > Standards
from the
main menu bar.
2.
Use the Preset pull down list to display
and select a preset from the list.
3.
The default displays for the selected
preset are shown.
4.
Click
OK
to close the dialog box. The
preset displays will open. (See Table 2.)
NOTE.
Some presets appear only if the
associated option is installed.
Table 2: Standards presets
Presets
Displays
WLAN (Option SV25NL/FL-SVPC)
SEM, Time Overview, WLAN Summary, WLAN Constellation
P25 (Option SV26NL/FL-SVPC)
MCPR, Time Overview, P25 Summary, P25 Constellation
Bluetooth® (Option SV27NL/FL-SVPC)
BT Eye Diagram, BT Frq Dev vs Time, BT Summary, BT CF
Offset and Drift, Spectrum, Time Overview
NOTE.
Bluetooth displays vary depending on the selected Test
Setup.
LTE™ (Option SV28NL/FL-SVPC)
LTE Summary, LTE Constellation, Time Overview, Spectrum,
LTE ACLR, LTE Channel Spectrum, SEM
NOTE.
LTE displays vary depending on the selected Test Setup.
26
RSA7100 Series Quick Start User Manual
