Operation
Mapping a measurement
Use the following procedure to map measurement results. Before you use the following procedure, do the following:
Load a map. (See page 49,
Select
Tools
>
Host Instrument
to switch to the SignalVu-PC application and set up the measurement you wish to
map. For example, if you want to map Signal Strength, set up the
Signal Strength
display (Select Displays > RF
Measurements > Signal Strength) or the
Chan Pwr & ACPR
display as required for the signal you will be measuring.
1.
In the RSA Map application, select
one of the measurement buttons. The
selected measurement is surrounded
with a blue highlight and the name of
the measurement appears below the
Thumbnail area.
2.
Click the Single Measurement button.
3.
Click or tap on the map.
If a GPS receiver is active, and you are
using a geo-referenced map, a single
measurement is placed at the current
GPS coordinates.
If a GPS receiver is not active, or if
you are using an image map, a single
measurement is placed where you
tapped the map
52
RSA7100 Series Quick Start User Manual
