Tektronix OM4006D, User Manual

Page: 19 / 205

Compliance information
Australia / New Zealand
Declaration of
Conformity – EMC
Complies with the EMC provision of the Radiocommunications Act per the
following standard, in accordance with ACMA:
CISPR 11:2003. Radiated and Conducted Emissions, Group 1, Class A, in
accordance with EN 61326-1:2006.
Australia / New Zealand contact.
Baker & McKenzie
Level 27, AMP Centre
50 Bridge Street
Sydney NSW 2000, Australia
Safety compliance
This section lists the safety standards with which the product complies and other
safety compliance information.
EU declaration of
conformity – low voltage
Compliance was demonstrated to the following speci fi cation as listed in the
Of fi cial Journal of the European Union:
Low Voltage Directive 2006/95/EC.
EN 61010-1. Safety Requirements for Electrical Equipment for Measurement,
Control, and Laboratory Use – Part 1: General Requirements.
EN 60825-1. Safety of Laser Products - Part 1: Equipment classi fi cation
and requirements.
U.S. nationally recognized
testing laboratory listing
UL 61010-1. Safety Requirements for Electrical Equipment for Measurement,
Control, and Laboratory Use – Part 1: General Requirements.
Canadian certi fi cation
CAN/CSA-C22.2 No. 61010-1. Safety Requirements for Electrical
Equipment for Measurement, Control, and Laboratory Use – Part 1: General
Requirements.
Additional compliances IEC 61010-1. Safety Requirements for Electrical Equipment for
Measurement, Control, and Laboratory Use – Part 1: General Requirements.
IEC 60825-1. Safety of Laser Products - Part 1: Equipment classi fi cation
and requirements.
This laser product complies with 21CFR1040.10 except for deviations
pursuant to Laser Notice No. 50, dated June 24, 2007.
Equipment type
Test and measuring equipment.
OM4000D Series Coherent Lightwave Signal Analyzer xiii