Getting Started with the MSO/DPO2000, MSO/DPO3000, and MSO/DPO4000 Series Oscilloscopes
4.
Connect a probe to channel 1, such as
the P2221 with the MSO/DPO2000 or
the P6139A with the MSO/DPO3000 or
MSO/DPO4000. Then connect the ground
lead of the probe to a point labeled
GND
on the Demo 2 board. Attach the probe
tip to the square pin on the Demo 2 board
labeled
CNT CLK
.
NOTE.
CNT CLK
is a clock used for a
synchronous counter.
Demo 2 Board Instruction Manual
3
Summary of Contents for DPO2000 Series
Page 2: ......