Giving Demos of Advanced Oscilloscope Features
6.
Push the lower-bezel
Source
button and turn
multipurpose knob
a
to select
2
from the list of
channels on the screen.
7.
Con
fi
rm the polarity is positive.
The lower-bezel
Polarity
button should
include the word
Positive
below it. If not, push
Polarity
and then the side-bezel
Positive
button.
8.
Push the bottom-bezel
Threshold
button.
Then turn multipurpose knob
a
to set the
threshold to approximately the midpoint of the
channel 2 waveform (e.g. 2.00 V).
9.
Push the lower-bezel
Set Mark When
button.
If it is not already selected, push the side-bezel
Pulse Width < 8.00 ns
button.
On the MSO/DPO2000, use multipurpose
knob
b
instead.
Set Mark
When
< 8.00 ns
Demo 2 Board Instruction Manual
39
Summary of Contents for DPO2000 Series
Page 2: ......
