Giving Demos of Advanced Oscilloscope Features
9.
Turn multipurpose knob
a
to select
RS-232
.
NOTE.
If you do not see the RS-232 choice, check
that you have a properly installed the appropriate
DPO2COMP, DPO3COMP, or DPO4COMP
application module in your oscilloscope.
10.
Push the lower-bezel
De
fi
ne Inputs
button.
Look at the side menu and con
fi
rm that
channel 1 is set to
Tx Input
. If not, set it there
with multipurpose knob
a
.
NOTE.
With MSO oscilloscopes, you can select
both analog and digital channels to measure TX
and RX signals.
11.
Con
fi
rm on the lower-bezel
Con
fi
gure
button
that the bit rate is set to 9600. This is the
default value.
12.
Push the lower-bezel
Bus Display
button and
the side-bezel
ASCII
button.
Demo 2 Board Instruction Manual
63
Summary of Contents for DPO2000 Series
Page 2: ......