Getting Started with the MSO/DPO2000, MSO/DPO3000, and MSO/DPO4000 Series Oscilloscopes
Demo I: Acquiring a Signal
1.
Connect the host side of the USB cable to
the USB port on the lower-left corner of the
oscilloscope front panel — or to either of
the two USB host ports on the rear panel
of some models.
2.
Connect the other end of the cable to the
device port on the Demo 2 board.
3.
The
POWER
LED will light on the Demo 2
board.
2
Demo 2 Board Instruction Manual
Summary of Contents for DPO2000 Series
Page 2: ......