Getting Started with the MSO/DPO2000, MSO/DPO3000, and MSO/DPO4000 Series Oscilloscopes
Hint: To move the cursors faster, turn off
fi
ne mode by pushing the
Fine
button,
if lit, on the front panel between the two
multipurpose knobs.
3.
Place one cursor at the midpoint of the
fi
rst falling edge. Place the other cursor at
the midpoint of the second falling edge to
measure the signal’s period. The cursor
readout should show a difference between
the cursors of approximately 800 ns.
Hint: To move the cursors more slowly, turn
the
fi
ne mode back on by pushing the
Fine
button, if unlit, on the front panel between
the two multipurpose knobs.
Demo 2 Board Instruction Manual
13
Summary of Contents for DPO2000 Series
Page 2: ......