Getting Started with the MSO/DPO2000, MSO/DPO3000, and MSO/DPO4000 Series Oscilloscopes
Demo II: Using Vertical Controls
1.
Turn the front-panel channel 1 Vertical
Scale
knob in both directions and observe
how the display changes. Also, notice the
channel 1 readout on the lower left of the
display shows the current volts/div setting.
Set the Vertical Scale to 1 V/div.
2.
Turn the front-panel channel 1 Vertical
Position
knob in both directions and
observe how the display changes. Position
the waveform in the center of the display.
6
Demo 2 Board Instruction Manual
Summary of Contents for DPO2000 Series
Page 2: ......