3.8.3 How to assemble the segmented coaxial probe
Figure 3-33: Equipment needed to assemble the coaxial probe
1
Converter and process connection
2
HC M4×20 screws (1 screw per probe segment)
3
Lock washers (1 pair of washers per probe segment)
4
Top (quantity: 1), middle (quantity: 1 or more) and bottom (quantity: 1) segments of the signal rod
5
PTFE spacer (1 spacer per probe segment)
6
Middle (quantity: 1 or more) and bottom (quantity: 1) segments of the coaxial tube
7
Union nut with 2 socket set screws M5×5 (1 union nut per segment of the coaxial tube)
8
Tools: two 7 mm open-end wrenches (not supplied)
9
Tools: two pipe (Stillson) wrenches (not supplied)
10
Tools: one 2.5 mm Allen wrench and one 2 mm Allen wrench (not supplied)
CAUTION!
Make sure that the housing and the single rod have the same ID numbers.
4
0
www.tek-trol.com
Technology Solutions
Instruction Manual
Tek-Flex
4100A
