6.4 Further information on device configuration
6.4.1 Protection of the device settings
The Passwords
Passwords
Passwords
Passwords menu lets you change the supervisor password.
How to change the supervisor password
•
Go to Supervisor > Advanced setup > Device setup > Passwords > Supervisor
Supervisor > Advanced setup > Device setup > Passwords > Supervisor
Supervisor > Advanced setup > Device setup > Passwords > Supervisor
Supervisor > Advanced setup > Device setup > Passwords > Supervisor.
•
Type in the new 6-character password (push the 4 buttons in any sequence).
•
Type in the new 6-character password again.
i
If the second entry is not the same as the first, the device will display the error message
"Password mismatch". Push [>>>>] and[
] at the same time and type in the new 6-character
password again.
•
Push [>>>>] and [
] (Esc) at the same time to go back to the "save settings" window.
•
Select Save
Save
Save
Save and push [
^
^
^
^
].
i
The device will go back to operator mode.
6.4.2 Network configuration
The device uses HART
®
communication to send information to HART
®
-compatible equipment. It
can operate in either point-to-point or multidrop mode. The device will communicate in
multidrop mode if you change the HART
®
address of output 1.
How to change from point-to-point to multidrop mode
•
Enter supervisor mode.
•
Go to Advanced Setup > Output 1 (HART) > HART Address
Advanced Setup > Output 1 (HART) > HART Address
Advanced Setup > Output 1 (HART) > HART Address
Advanced Setup > Output 1 (HART) > HART Address.
•
Enter a value between 1 and 15 and push [
^
^
^
^
] to confirm (see the caution below).
•
Push the Escape buttons ([>>>>] + [
]) until you get the save/cancel screen.
•
Select save.
•
Push [
^
^
^
^
].
i
Output 1 switches to multidrop mode. The current output is set to 4 mA. This value does not
change in multidrop mode.
INFORMATION!
Make a note of the password and keep it in a safe place. If you lose the password, please speak
or write to your supplier.
INFORMATION!
For more data, refer to Networks on page 59
.
CAUTION!
Make sure that the address for this device is different from others in the multidrop network.
8
3
www.tek-trol.com
Technology Solutions
Instruction Manual
Tek-Flex
4100A
