Information screens for a device with the second output option
Text and image
screen
Go to
% current output
screen
Go to
Text screen
Go to
[
]
[
]
Level
[>>>>]
<Output 1: output
function>
<Output 2: Output
Function>
1
[>>>>]
Level
[>>>>] (Text
and
image)
[
] / [
]
[
] / [
]
Distance
[>>>>]
<Output 1:
Output Function>
<Output 2:
Output Function>
1
[>>>>]
Distance
[>>>>] (Text
and
image)
[
] / [
]
[
] / [
]
Layer
2
[>>>>]
<Output 1:
Output Function>
<Output 2:
Output Function>
1
[>>>>]
Layer
2
[>>>>] (Text
and
image)
[
] / [
]
[
] / [
]
Volume (Mass)
3
[>>>>]
<Output 1:
Output Function>
<Output 2:
Output Function>
1
[>>>>]
Volume (Mass)
3
[>>>>] (Text
and
image)
[
] / [
]
[
] / [
]
Ullage Volume
(Ullage Mass)
3
[>>>>]
<Output 1:
Output Function>
<Output 2:
Output Function>
1
[>>>>]
Ullage Volume
(Ullage Mass)
3
[>>>>] (Text
and
image)
[
] / [
]
[
] / [
]
Layer Volume
(Layer Mass)
4
[>>>>]
<Output 1:
Output Function>
<Output 2:
Output Function>
1
[>>>>]
Layer Volume
(Layer Mass)
4
[>>>>] (Text
and
image)
[
]
[
] / [
]
Back to the top of the
list
Signal screen
5
[
]
Back to the top of the
list
1
Refer to the Operation: Function description section (Table C. Advanced setup, menu item C.3.1 Output Function (out-
put 1) and C.4.1 Output Function (output2))
2
This screen is for devices with the "interface" option only
3
This data is only available if you created a volume table (or a mass table). Refer to the Conversion menu in supervisor
mode (Quick Setup > Setup Mode > Conversion).
4
This screen is for devices with the "interface" option only. This data is only available if you created a volume table (or
a mass table). Refer to the Conversion menu in supervisor mode (Quick Setup > Setup Mode > Conversion).
5
This screen shows voltage amplitude of return signals against distance. This is used for finding level and interface
when there are interference signals. Push [>] to move the cursor from one signal peak to another.
6
4
www.tek-trol.com
Technology Solutions
Instruction Manual
Tek-Flex
4100A
