USE AND MAINTENANCE MANUAL
AUTOMATIC DOUGH SHEETER
Mod. SMART-AUTOSMART
19/96
Revision n°1
date 20.07.2006
Technical Assistance Service tel. +39/0444414731
Fig. 4
On the side part of screenning (fig.4) there are 2 arrows
→
←
(15,16) . By pressing
them it is possible to make the belts revolving on one side or the other or alternatively to
move them through the 2 green key-buttons (14,15 illustrated drwg chap.2.1. technical
description). Pressing the flour duster button on left upper side (17) it is possible to
make it working or not; but it is necessary to verify the position of the key-button on the
flour duster. Anyway, the flour duster working is coordinated with belts movement.
on the upper right side the key-buttons with arrows
↑
↓
(18) make the dough winder
working up or down (all these movements are done in actual time. On the bottom left
side (19) it is possible to adjust the belt speed from 100mm/sec to 10mm/sec.
At last, the data on centre of screenning (20) indicates the thickness of the dough
(height of cylinders) which can be varied by imputing of dough thickness in mm; the
machine will automatically adjust the height.
To return back to the main screenning, it is necessary only to act on th right bottom key-
button. (21)
