USE AND MAINTENANCE MANUAL
AUTOMATIC DOUGH SHEETER
Mod. SMART-AUTOSMART
9/96
Revision n°1
date 20.07.2006
Technical Assistance Service tel. +39/0444414731
1.5 ASSEMBLY
The machine is delivered on a pallet and wrapped with plastic and protected
by a wooden crate.. In order to assure a safe transportation, the working
tables are diassembled and packed separately.
It is necessary to take off the plastic carefully in order to avoid the tables or
other compounds to fall down.
Unpack the machine from the crate rendering free all the components.
Release the screws (1)
Before proceeding with assembly of the flour recovers and worktops see
item
1.7 instructions for inside handling.
Lay the flour recovering sheet as
per picture and proceed with screwing (1). The worktops are assembled
through a baionnet coupling. Use a rigid lever of 50 cm to work easily.
The rotation pin has to be inserted on the rear side of the machine first as
per side picture.
By using the lever (1) push the worktop unitl
the grooved shaft will go inside the proper seat (2). To facilitate this
operation a porthole has been done on the side panel for the grooved
shaft passage. Once the link is done, pull the belt on order to make the
shaft rotating (motorised cylinder); in this way the coupling is perfectly
done. A plug located near to the flour duster will be connected to the
Mains.
