USE AND MAINTENANCE MANUAL
AUTOMATIC DOUGH SHEETER
Mod. SMART-AUTOSMART
29/96
Revision n°1
date 20.07.2006
Technical Assistance Service tel. +39/0444414731
AUTOMATIC FLOUR DUSTER
Fig. 17
The working of the automatic flour duster is simply controlled by a two positions switch and by the
control panel. It is important to keep in mind that this function works only if the button of flour
distribution is on START position. Moreover, its working has to be driven through the control panel,
both for the manual and the automatic operation. In case one of the two switches is not inserted
the flour distribution will not work.
OPTIONAL FLOUR DUSTER
:
The flour duster is operated directly through the key 1 which allow to pass from automatic working
to manual working. In order to know if the key 1 is set on +/- or on 4VEL section it is necessary
only to check which red light is on corresponding to one of these functions. If light 7 is ON that
means the flour duster is in +/- function; if light 8 is ON that means 4VEL device is activated; to
change from one function to the other it is necessary only to press once on the key 1.
2
8
1
7
3
4
5
6
