USE AND MAINTENANCE MANUAL
AUTOMATIC DOUGH SHEETER
Mod. SMART-AUTOSMART
18/96
Revision n°1
date 20.07.2006
Technical Assistance Service tel. +39/0444414731
Before starting any manoeuvre be sure that red push-button is unlocked and the safety
grids are down. Fig.2 will appear on the screen as working screen; before starting the
programation we advise to cancel all the alarm information (6).
The key-button (8) will reset the machine and the calibrating cylinders will be at maximum
opening. The starting of flour duster is activated by a simple push-button ON/OFF. On
upper side of the screen it is possible to read the name and program number (4,5) in case
of started program acting on key-button STOP (7) it is possible to stop correctly the
working phase. By pressing on left green key-button (15 – see illustrated drwg chap.2.1
technical description) as indicated on picture, it is possible to operate without any
problem. To start a new program, the operator has only to touch the screen on the picture
located on the left button side (3) in order to enter in datas.
Fig. 3
In this section (fig.3) the operator can find various functions: SETTINGS (9), MANUAL
FUNCTIONS (10), in this case it is possible to operate manually, PROGRAMMING (11)
(which can be quick or slow), PROGRAMS LIST (12) (where the operator will find the preset
user’s programs) VISUALISE/MODIFY (13), DOUBLE PROGRAM (12B), EXIT (14) to return
back at first screening.
2.
WORKING METHOD:
it is possible to select the way of working desired on the
automatic sheeter SMART: it can be manual or automatic.
3.
MANUAL WORKING:
the sheeter can work in manual version, meaning the operator can
act directly on the machine.
