USE AND MAINTENANCE MANUAL
AUTOMATIC DOUGH SHEETER
Mod. SMART-AUTOSMART
23/96
Revision n°1
date 20.07.2006
Technical Assistance Service tel. +39/0444414731
Fig. 8
Now the screen will show the working page with the list of the whole sheetings to be done
and the various thickness for each passage (38).
From this window it is possible to decide from which sheeting the operator wants to start
(37). Even from this situation it is possible to modify the name of the program just by
touching the screen near the name.
The key 36 allows to return back to the menu of programation selection (fig 5) and to do
eventual modification (see following chapter fig.10). The window will show all the previous
parameters (39,40) which cannot be varied from here, only through selection menu (36).
In case of correct program, it is possible to start the working pressing one green key-button
(14,15 chap.2.1.technical description). The key 41 allows to start the cycle of initial window.
•
Normal programation
Fig. 9
When using the normal programmation (23 fig.5) the first information to insert are the
number to save the cycle (42), the reference name (43) reminding not to use a number
already existing unless to overwriting the program. Once it is confirmed (44), the window as
per fig. 8 will appears. To modify something it is necessary to press the selection key-
button (36) opening thus a window as per fig.7: the option to select quick or slow