TECO E510-201-SH, Instruction Manual

Page: 82 / 425

4-16
4.2 Parameters
Parameter group Group Name
Group 00
Basic Parameters
Group 01 V/F Control Parameters
Group 02 IM Motor Parameters
Group 03 External Digital Input and Output Parameters
Group 04 External Analog Input and Output Parameters
Group 05 Multi-Speed Parameters
Group 06 Automatic Program Operation Parameters
Group 07 Start /Stop Parameters
Group 08 Protection Parameters
Group 09 Communication Parameters
Group 10 PID Parameters
Group 11 Auxiliary Parameters
Group 12 Monitoring Parameters
Group 13 Maintenance Parameters
Group 14 PLC Parameters
Group 15 PLC Monitoring Parameters
Group 16 LCD Parameters
Group 17 Automatic Tuning Parameters
Group 18 Slip Compensation Parameters
Group 20 Speed Control Parameters
Group 21 Torque And Position Control Parameters
Group 22 PM Motor Parameters
Group 23 PM & HAVC
Parameter Attribute
*1
Parameters can be changed during run operation.
*2
Reserved
*3
Parameter will not reset to default during a factory reset (initialization).
*4
Read-only parameter
*5 Parameter will be displayed in being coupled with the option card.
*6
Parameter will be displayed only in LED keypad.
*7
Parameter will be displayed only in LCD keypad.
*8 When 13-08 setting is changed, the value will be also changed.