Planning, Installation, Maintenance and Operating Instructions
dw
62-2 ME Sliding Doors
- 6 -
Using FAZ 16/25 stay bolts
Drill bit: Ø16mm
Drilling depth: Min.130mm
Caution:
For brackets with two bore holes:
Drill the first bore hole and fix and
align. Subsequently drill the
second bore hole
Brackets for masonry in the sliding area
Insert bolt. Fix the angle bracket
using a plain washer and hexagon
nut. Tighten the counter plate to the
outside of the wall using a plain washer
and a hexagon nut.
Using M12 through bolt
Drilling depth: Through bore
Drill bit: Ø12mm
Drill bit for sleeve: Ø30mm
Drilling depth for sleeve: Min. Ø80mm
Using M16 through bolt
Drill bit: Ø16mm
Drilling depth: Through bore
Drill bit for sleeve: Ø30mm
Drilling depth for sleeve: Min. Ø80mm
Caution:
For brackets with
two bore holes: Drill
the first bore hole
and fix and align.
Subsequently drill
the second bore
hole.
Brackets for ceiling mounting
Using FAZ 12/10 stay bolts
Drill bit: Ø12mm
Drilling depth: Min. 95mm
Distance: 94mm
Dimension “X“: 51mm
Using FAN 16/25 stay bolts
Drill bit: Ø16mm
Drilling depth: Min. 130mm
Distance: 124mm
Dimension “X“: 36mm
dis
tan
ce
X
Alternative bracket fixing by welding onto a bracket preset in concrete
Lintel mounting Ceiling mounting
Set the bracket plate in concrete
while constructing the lintel or
ceiling. Weld the angle brackets or
ceiling brackets to the bracket
plates. (See 1 “General Instructions
– bullet 7!)
