Planning, Installation, Maintenance and Operating Instructions
dw
62-2 ME Sliding Doors
- 5 -
Fixing Distances
Type of
Door
Door Area
m
2
“B“
“C“
“D“-“G“
“H“-“K“
“M“
dw 62-ME
-
5
25
Please refer to the enclosed
assembly/installation
instructions for dimensions
See brackets
for
dimensions
150
Important:
-
Compare the door number in the assembly/installation instructions with the door number on the end panel to
ensure correct assembly.
Assembly Preparation
Check the completeness and correctness of the delivery including the individual parts and accessories.
end panel
door number
6. Assembly
Process
1. Check and compare the dimensions of the wall opening with the dimensions in the assembly drawing.
2. Determine the height and lateral distances of the wall seal and brackets
3. Assemble wall seal and brackets (see 1). Assemble the run-in bracket (see 2)
4. Assemble runner rails, align, clean and coat running surfaces with a resin-free oil (see 3)
5. Hang the door leaves and roller mechanism (see 4). Start with the run-in elements.
6. Connect the door leaves at the top (see 5)
7. Connect the door leaves at the bottom
(see 6)
8. Position guide shoe/roller (see 7)
9. Assemble
accessories (e.g. recessed handles, wicket door, etc.) (see 8)
10. Assemble metal casing
at the top (see 9)
11. Insert door
7. Installation
Details
7.1 Fixing the Brackets
Prior to assembly, please refer to the assembly and installation instructions enclosed with the sliding door for all
dimension and fixing information.
Brackets for concrete in the opening and sliding area
Using FAZ 12/30 stay bolts
Drill bit: Ø12mm
Drilling depth: Min. 115mm
