Planning, Installation, Maintenance and Operating Instructions
dw
62-2 ME Sliding Doors
- 11 -
-
Wicket door without sill:
Install and align the leaf together
with the wicket door.
Use the leaf connector to connect the
upper leaves (see 5).
Additionally screw the 3 M10x210mm
countersunk screws (10) through
the door frame into the adjacent leaf
on the hinge side.
Use 2 M5x50mm countersunk screws (13)
with sleeve screws to fix the guide bracket
(see 6) in the wicket door area
on the hinge sides.
Sliding door track:
Additionally fix two guide shoes in the sliding area
(see 7 with the respective diagram)
General hinge information:
-
Lubricate hinge bolts
-
When knocking in the hinge bolts, ensure that the
notch (14) is positioned in the hinge bracket gap.
Installation of the door latches and door closer
-
Assemble the door latches. Install the flat latch facing the wall
-
Assemble and adjust the door closer. The setting has to ensure that the door closes automatically from
any opening angle. (Please refer to the instructions of the respective upper door closer for assembly and
adjustment instructions)
-
Check closing function (the wicket door has to close from every possible position)
-
Check latch bolt contact (min. 6mm)
Note: The wicket door position of sliding doors with an automatic electric drive has to be checked via
magnetic contacts (2 contacts integrated into the frame and door leaf). The door should only move if the
wicket door is completely closed. Refer to the enclosed wiring diagram for the connection diagram.
7.10 End Stoppers
Use hexagon bolts (3) and clamp (4)
to fix the end stoppers (2). Attach the end stoppers
when the door is either open or closed so that they come
up against the roller mechanism.
7.11 Rain Guard
(Optional extra, e.g. for outside doors)
Position the rain guard (6) and fix it to the
mounting brackets (8 and 9) using 4.8x16mm
self drilling screws (7).
Outside doors: The customer should seal the
upper gap between the rain guard and the lintel/wall.
