Planning, Installation, Maintenance and Operating Instructions
dw
62-2 ME Sliding Doors
- 16 -
For larger doors, bolt a magnetic clamp (7) to bracket (A) using M4x10mm bolts. Fix the magnetic clamp
counterplate (7a) to the base plate on the rear door leaf using M4x8mm bolts. Weld or bolt the base plate to the
door leaf seal in advance. Use M8x30mm bolts for the latter option.
10.3 Assembly of the Hydraulic Brake Mechanism, Limit Stops and Magnetic Clamp
In the opening direction, the end brake (5a) comes up against the bracket (A). For larger doors, bolt a magnetic
clamp (6) to bracket (A) using M4x10mm bolts. Fix the magnetic clamp counterplate (6a) to the base plate on the
rear door leaf using M4x8mm bolts. Weld or bolt the base plate to the door leaf seal in advance. Use M8x30mm
bolts for the latter option.
11. Special Versions
10
5
8
11
1
7
2
6
3
9
4
9
8
11.1 Artificial Lintel
•
Screw the box section (1) with the 50mm wide
insulating strip (2) to the ceiling
[Ø7mm countersunk screws (3)
with 10/200 plug (4) – Ø 10 drill bit,
drilling depth min. 100mm].
•
Fix the housing (5) with the insulating strip
to the ceiling [FAZ 12/10 plug (6);
e
≤
500, Ø12mm drill bit, drilling depth min. 95mm]
•
Laterally screw the insulating strips (7) with the
upper wall seal (8) to the box section (1)
[M8x45mm hexagon bolt (9) with washer].
•
Subsequently connect the housing (5) to the wall
seal (8) [M5x40mm cheese head screw
(10)
;
e
≤
500].
•
Fix the ceiling sleeve (11) as described in
1.4.
