Planning, Installation, Maintenance and Operating Instructions
dw
62-2 ME Sliding Doors
- 14 -
Note: BMH hook bolt lock
The door can be equipped with a hook bolt lock by the manufacturer. An information sticker should be affixed to
both sides of the door leaf in the lock area to explain lock functioning and prevent damages. The information
stickers are included in the accessories if the door has been equipped with this type of lock by the manufacturer.
Hook bolt position 1:
Lock is unlocked - Hook bolt locked in open position.
Door can be opened and closed unhindered.
Hook bolt position 2:
Lock pre-locked. The spring-loaded hook bolt locks the door
after closing. Open the hook bolt via the profile lock.
Hook bolt position 3:
Lock pre-locked. Hook bolt locked in the closed position.
Caution! The hook bolt should not be locked when the door is
open, otherwise the door can be damaged during closing!
Information for sliding doors fitted with a triple action BMH hook bolt: This information sticker
should be affixed to both sides of the door leaf directly next to the profile lock. Also refer to the
Planning, Installation and Maintenance Instructions for 1 & 2 leaf sliding doors and elements.
10. Doors with Counterbalance Weight (special version)
10.1 Rope Guidance and Counterweight Suspension
•
Rope fixing
Assemble the weight box according to 1.5. Fix the rope to the
roller mechanism and the weight suspension; use 3 rope clamps (7).
Hang and counterbalance the weights (see 2.6).
Fix the weight box cover according to
2.6.
Ensure that the rope and the weights do not catch on protruding rivets, screws or bolts.
Rope guidance in the weight boxes
Caution: Ensure that the weights are 50mm
(safe distance) above the finished floor.
5
3
1
4
2
4
3
2
3
3
4
4
2
2
1
5
10.2 Rope Guidance and Weight Suspension:
-
Wall mounting
-
Ceiling mounting
Rope guidance
:
Caution:
In order to attach the rope, fix
the clip with the rope (1) to the first roller
mechanism - as viewed from the leaf impact (see 2.1).
•
Screw or weld a double rope deflection pulley
(4) to the runner rail (3).
•
Feed the other end of the rope (2) above or in front of the
runner rails/brackets downwards over the weight box
roller and fix it to the rope eye of the weight suspension
with 2 rope clamps [see 2.5].
Weight suspension:
Hang and counterbalance the weight.
Fix the weight box cover to the weight box bracket on both
sides using M6x8mm cheese head screws (5) (3x at the same height).
Weight counterbalance:
Only use the amount of weight required for safe closing of the door.
The door has to open with a max. force of 200 N.
