Planning, Installation, Maintenance and Operating Instructions
dw
62-2 ME Sliding Doors
- 12 -
8. Glazing
Elements
Various glass and glazing elements can be supplied.
Glazing elements are fixed in rubber frames by the manufacturer. However, glazing elements can also be fixed in
aluminium profiles by the customer.
-
The manufacturer shall assume no liability for injuries or damage to persons or property caused by non
shatter-proof glass or incorrect installation by third parties.
-
The manufacturer only installs shatter-proof glass which complies with the requirements of DIN EN 12600.
-
Please note that any replacement glass has to have the same performance properties in accordance with
DIN EN 12600 as regards impact resistance, etc. as the glazing elements installed by the manufacturer.
-
Please contact
Tekla-Technik, Tor + Tür GmbH & Co. KG
for more information about permissible and
manufacturer installed glazing elements.
-
Glazing work should only be carried out by qualified personnel. The retrofitting of door leaves with
transparent panels (glass) is strictly forbidden.
leaf glazing element with aluminium profile
leaf glazing element in rubber frame
Z
Z
9. Drive (special version)
Dw 62 ME sliding doors can optionally be equipped with an electric drive with either “deadman” or “pulse
function”. The control button OPEN or CLOSED has to be pressed continuously for door movement with an
electric drive with “deadman operation”.
For automatic or pulse function, door movement OPEN, CLOSED or STOP is triggered via a pulse at the button.
The buttons only have to be pressed briefly during pulse operation. A remote control or similar device can be
optionally integrated.
Right-hand version: “drive - lintel mounting”
Electric drive with the drive rail attached to the runner
rail.
FAZ 12-10
e <650
cheese head screw
bracket
"rail-mounted"
drive
door link
drive rail
drive rail
main contact edge
with rubber trim
"rail-mounted"
drive
bracket
"rail-mounted"
drive
door link bracket
drive rail
drive rail
main contact edge
with rubber trim
"rail-mounted"
drive
cheese head screw
Left-hand version: “drive - ceiling mounting”
Electric drive with the drive rail attached to the runner
rail.
