Planning, Installation, Maintenance and Operating Instructions
dw
62-2 ME Sliding Doors
- 18 -
12. General Safety Instructions for Assembly
ds when using lifting gear
he weight of the door
-
ments ensure that the load is secured correctly and that it can neither become loose nor
Always use scaffolding or lifting platforms to carry
work at >2 m.
Ensure that unauthorised persons cannot enter the installation area during assembly.
tructions.
Cau
, fully functional doors. How
door
has to be disassembled due to damage, the type of damage is decisive for the disassembly procedures. The
Doors should be serviced by a qualified technician at least every 12 months to avoid malfunctioning and to
ble-free operation.
the door leaf and runner rail for corrosion
runner rail attachment, if necessary, retighten fixings
ension
Runner rail:
Lubricate runner rail and roller track
c brake mechanism and shock absorbers
If m
diately
-
Always observe the maximum permissible loa
is approx. 28kg/m².
and devices. T
-
Only use intact and certified lifting devices (assembly cranes, fork lifts) and lifting gear (cables, chains, belts).
Before lifting the ele
slip. The elements can suddenly jerk and swing – beware risk of injuries!
-
During assembly avoid wind loads on the not fully assembled door, e.g. in thoroughfares or subways. Close
or secure all openings in advance.
-
During the entire assembly period ensure that individual door elements and components cannot fall down or
be knocked down.
-
Always wear suitable protective clothing (protective gloves, hats, boots, etc.) during assembly.
-
out assembly
-
- Plan disassembly in accordance with local conditions.
-
Disassembly is carried out in reverse order
to assembly. Observe the specified assembly safety ins
tion: The disassembly steps have been designed for undamaged
ever, if a
steps listed below are, therefore, only intended as a rough guide in such cases. The sequence of actions may
change or not be necessary depending on the situation and damage. Disassembly should always be carried out
with the utmost care and attention and under the supervision of a specialist.
13. Maintenance
guarantee trou
General condition:
o
Visual inspection of
o
Check
o
Check toothed belts and steel ropes for damages and correct t
o
Clean runner rail
o
Braking system:
o
Check and, if necessary, set hydrauli
alfunction
c
s o cur (e.g. stiff door operation, unusual noises during operation, etc.), imme
contact a
spe alist co
ark
fter operative assembly of the door system (door and, if necessary, drive and/or hold open device), the
door system
f Conformity (in accordance with Article 8 of the European Directive
in fully functional
ed under normal operating conditions -
ci
mpany to carry out checks.
14. Declaration of Conformity and CE M
A
manufacturer
has to issue an EC Declaration o
89/392/EEC) and present it to the owner for future reference. The door system is additionally provided with a “CE” mark.
Note:
Manufacturer of the door system or the hold open device is the installation engineer or the installation company
hich is in charge of mounting the door system/hold open device, i.e. connecting and assembling the individual
w
components (door and, if necessary, the hold open device and/or electric drive, etc.). It is expressly stated that it is not
automatically the door manufacturer or a subcontractor commissioned by the installation company.
The Marantec electric drive (type 252) has been designed for approx. 35,000 operating cycles provided that the
oors have a leaf area of
≤
25m
2
and are operated under normal operating conditions -
d
condition - without impairments.
The Schnetz electric drive (type ATS 300 WST) has been designed for approx. 25,000 operating cycles
rovided that the doors are operat
p
in fully functional condition - without impairments.
tenance of
Please observe these specifications for future main
power operated doors.
