Record & Disk Management
DVR User Manual
49
If the manual mode is selected, you need to set the encode parameters and record schedules of
each camera. See 7.2 Encode Parameters Setting and 7.3 Schedule Setting for details.
7.1.2 Advanced Configuration
Click Start
Settings
Record
Advanced to go to the following interface. Enable or disable
cycle record (cycle record: the earliest record data will be replaced by the latest when the disks
are full). Set the pre-alarm record time, post-alarm record time and expiration time of each
camera and then click “Apply” to save the settings.
Pre-alarm Record Time
: set the time to record before the actual recording begins.
Post-alarm Record Time
: set the time to record after the actual recording is finished.
Expiration Time
: set the expiration time for recorded video. If the set date is overdue, the
recorded data will be deleted automatically.
7.2 Encode Parameters Setting
Click Start
Settings
Record
Encode Parameters to go to the interface as shown below. Set
the encode, resolution, FPS, bitrate type, quality, max bitrate and audio of main stream for each
camera in “Event Recording Settings” and “Schedule Recording Settings” interfaces. Click
“Apply” to save the settings. You can set the record stream of each camera one by one or batch
set them for all cameras.
Click Start
Settings
Record
Stream Settings to go to “Sub Stream” interface. Set the
Summary of Contents for PS8E1N2
Page 1: ...8 Channel Recorder 1U PS8E1N2...
Page 118: ...FAQ DVR User Manual 112 Fig 9 2...
Page 121: ...A4...
